Skip to main content

UK Grading System Guide

Why British degrees are classified rather than graded on a GPA, what the percentage bands mean, and why UK marks do not translate directly to a 4.0 scale.

The UK does not use GPA

This is the single most important thing to understand about British higher education: UK universities do not award a GPA. They award a degree classification — a band, determined by your weighted average mark across the modules that count towards your final award.

So if an application asks for your GPA and you studied in the UK, you do not have one. What you have is a classification and a percentage average, and those are the figures to report.

Degree classifications

ClassificationTypical averageCommonly called
First-class honours70% and aboveA First
Upper second-class honours60–69%A 2:1
Lower second-class honours50–59%A 2:2
Third-class honours40–49%A Third

Below 40% is normally a fail, though an ordinary degree may be awarded in some circumstances. Classification boundaries are near-universal across UK institutions, but the rules for reaching them are not — see below.

Why 70% is excellent here

UK marking is absolute rather than curved, and the top of the range is used sparingly. A 70% is a first-class mark; marks above 80% are uncommon and reserved for work of publishable or near-publishable quality. Many assessments are designed so that a complete, competent answer earns in the 60s, with the highest band requiring genuine originality.

This is why mapping UK marks onto a US percentage scale produces nonsense. A 70% UK mark corresponds to the top classification; a 70% US mark is a C−. Any conversion that treats the two as equivalent will badly misrepresent a British degree.

How the final average is calculated

The weighting rules are set by each institution and vary considerably:

  • Year weighting. A common pattern for a three-year bachelor's is to discount the first year entirely and weight the second and final years 25:75 or 40:60. Others use 20:30:50.
  • Credit weighting within a year. Modules are weighted by their credit value — typically 15, 20 or 30 credits out of 120 per year.
  • Discounting. Many institutions allow the lowest-scoring module, or a fixed number of credits, to be discounted from the final calculation.
  • Borderline and classification rules. An average just below a boundary may still be raised if enough credits sit in the higher band — the exact rule differs by institution.

Because of discounting and borderline rules, a plain credit-weighted average of your module marks can differ from your official classification. Your institution's classification algorithm is the authority.

If you need to report a GPA anyway

Some applications, particularly to US institutions, will not accept a classification. When you have to give a number:

  1. Report the classification and the average together. "First-class honours, 72% weighted average" conveys more than any converted figure.
  2. Check for an official conversion. Some US universities publish mappings for UK classifications — typically treating a First as roughly 3.7–4.0 and a 2:1 as roughly 3.3–3.7. Where such a table exists, use it.
  3. Do not run your percentage through a proportional formula. Converting 72% as 72% of 4.0 gives 2.88, which would misrepresent a first-class degree as a mid-B average. This is the clearest case on the whole site of a conversion that should not be attempted mechanically.

Our GPA and percentage calculators exist for credit-based grade-point systems. For a UK degree, use them only if your institution has itself issued a grade-point figure.

Masters degrees

UK taught masters degrees use a different set of bands: Distinction at 70% and above, Merit at 60–69%, and Pass at 50–59%. The thresholds echo the undergraduate classifications but the terminology is distinct, and the pass mark is usually 50% rather than 40%.